Integral sensor node

Integral sensor node

Remote recessed sensor node

Remote recessed sensor node

Remote surface sensor node

Remote surface sensor node

Remote sensor node with suspension cap

Remote sensor node with suspension cap

Cascade Flex with Organic Response

Cascade Flex with Organic Response

EX1R with Organic Response

EX1R with Organic Response

Wall plate

Wall plate

Classroom wall plate

Classroom wall plate

SEN classroom wall plate

SEN classroom wall plate

Mains Single Button OR Switch

Mains Single Button OR Switch

Mains Single Button OR Switch

Mains Single Button OR Switch

EnOcean double rocker

EnOcean double rocker

EnOcean double rocker

EnOcean double rocker

EnOcean double rocker

EnOcean double rocker

EnOcean rocker

EnOcean rocker

EnOcean double rocker

EnOcean double rocker

EnOcean rocker

EnOcean rocker

Explore our product range

Integral sensor node
Remote recessed sensor node
Remote surface sensor node
Remote sensor node with suspension cap
Cascade Flex with Organic Response
EX1R with Organic Response
Wall plate
Classroom wall plate
SEN classroom wall plate
Mains Single Button OR Switch
Mains Single Button OR Switch
EnOcean double rocker
EnOcean double rocker
EnOcean double rocker
EnOcean rocker
EnOcean double rocker
EnOcean rocker

Overview

Organic Response® lighting control is based entirely on distributed intelligence. Each luminaire is fitted with a sensor node that allows it to respond to its environment and information from its neighbouring luminaire, so that the optimal amount of light is delivered when and where needed. Each sensor node is fitted with a motion sensor, ambient light sensor, infrared transmitter and infrared receiver that allows it to communicate wirelessly with each of its closest neighbours. Plus RF 2.4Ghz transmitter/receiver for cloud based communication.

Out the Box Functionality
A sensor node sees occupancy and communicates that occupancy and light level to its neighbours via infrared signal. Its neighbours respond by outputting predetermined light levels and simultaneously transmits to further neighbouring sensor nodes. This propagates rapidly across the floor, minimising energy use wihtout any programming. Once presence is no longer detected the luminiares will automatically drop to a low level light before switching off. This happens without programming and commissioning ensuring energy savings from the day of installation.

Optimisation

The system can be easily optimised with no need for expert commissioning and is configurable via the Organic Response® app.

 - Adjust light levels and dwell times
 - Change lighting “Personalities”
 - Activate daylight dimming 
 - Create independent and dependent zones
 - Create customised scenes
 - Pair wireless switches

Response Portal
Utilise sensor information and gateways for cloud connectivity to provide a centralised view of building wide assets.

 - Real time visibility of current utillisation and performance
 - Detail historical data of utilisation and performance for trend analysis 
 - Real time system status with fault monitoring and email fault notifications 
 - Detailed historical fault data 
 - Cloud portal time based scheduling for control of building lighting 
 - BMS integration via BACnet
 - Automatic over the air updates

Key Features

  • Out the box functionality with zero programming
  • Occupancy (presence and absence) detection
  • Daylight sensing
  • Scene setting
  • Mesh network for robust wireless coms
  • Create independent and dependent zones
  • Can be used with power distribution units for simplified and speedy installation, see:

​​

Emergency Features

  • Independent emergency lighting monitoring and testing
  • Can be integrated into existing installations easily, without the need for additional wiring
  • Testing and reporting to BS EN 62034 via a robust, reliable 2.4GHz radio frequency (RF) mesh
  • Testing and monitoring in accordance with BS EN 50172
  • Simple set up via web interface
  • Automatic (programmable) testing of each emergency luminaire
  • Reports downloadable as a PDF or XML file
  • Test and system data is accessed via Ethernet from any web browser
  • System commissioning is required

 

Technical

  • Infrared carrier frequency: 38kHz
  • Distance between sensor nodes: IR comms 3 metres max
  • Maximum sensor mounting height: 3.7 metres
  • Sensor node ambient temperature: 0ºC to 50ºC
  • Luminaire compatibility: DALI (Subject to Organic Response® list of approved drivers)
  • SN3 integral sensor node driver load: 1 DALI device max  
  • ORG3RSN Remote sensor node driver load: 4 DALI devices max
  • Ethernet gateway communication: IR comms, RJ45 (Cat5)
  • Gateway node capacity: Max 150 sensor nodes per gateway
  • Gateway max distance from node: 7 metres max
  • Gateway security: 128bit AES, TLS, storage Amazon AWS IoT
  • Wireless battery-less wall switch protocol: EnOcean Easyfit rocker switches available in white, and white/grey where contrast is required from the mounting surface
  • Battery powered or Mains powered Infrared Organic Reponse switch available in white, and white/grey where contrast is required from the mounting surface 
  • BMS Integration BACnet protocol 

 

 

full width image

Click on part code below for downloads

Part Code Product Type Sensor Type Communication Method Installation Method Mounting Method Max. Mounting Height Detection Range
ORGDNGLE Accessory Audio plug, USB
ORGAVW Wall Mounted
ORGAVB Wall Mounted

Click on part code below for downloads

Part Code Product Type Sensor Type Communication Method Installation Method Mounting Method Max. Mounting Height Detection Range
ORGRSN3R1M Detector Infrared Wirepas Wireless RF (2.4 GHz) Wired Recessed 3m 5m Diameter @ 2.7m height
ORGRSN3R3M Detector Infrared Wirepas Wireless RF (2.4 GHz) Wired Recessed 3m 5m Diameter @ 2.7m height
ORGRSN3S1M Detector Infrared Wirepas Wireless RF (2.4 GHz) Wired Surface 3m 5m Diameter @ 2.7m height
ORGRSN3S3M Detector Infrared Wirepas Wireless RF (2.4 GHz) Wired Surface 3m 5m Diameter @ 2.7m height

Click on part code below for downloads

Part Code Product Type Sensor Type Communication Method Installation Method Mounting Method Max. Mounting Height Detection Range
ORGGWKIT Gateway N/A Wireless RF Mesh 2.4GHz/ Ethernet 10/100Mbps RJ45 Wired

Click on part code below for downloads

Part Code Product Type Sensor Type Communication Method Installation Method Mounting Method Max. Mounting Height Detection Range
ORGWP Wall Switch Infrared
ORGWPC Wall Switch Infrared
EWSSB EnOcean Bluetooth® Single Wall Switch 2.4 GHz/BLE See description
EWSDB EnOcean Bluetooth® Double Wall Switch 2.4 GHz/BLE See description
ORGWPC/G Wall Switch Infrared Wall Mounted
ORGMWPC/G Wall Switch Infrared Wall Mounted
ORGMWPC Wall Switch Infrared Wall Mounted
ORGMWPS/G Wall Switch Infrared Wall Mounted
ORGMWPS Wall Switch Infrared Wall Mounted
EGSSB EnOcean Bluetooth® Single Wall Switch 2.4 GHz/BLE See description
EGSDB EnOcean Bluetooth® Double Wall Switch 2.4 GHz/BLE See description

Wireless Proximity Limited Communication lighting control system.  Integrated or remotely housed sensor nodes detect motion and ambient daylight levels and transmit and receive infrared messages wirelessly for intelligent decisions about light levels required.  Can be customised to provide an interface with building management systems and vital building management information via a web based portal – as Whitecroft Lighting ORGANIC RESPONSE®.

Product Downloads

Single download

Add to ZIP

Back to top